Massey Ferguson

Масло для Massey Ferguson - MF - 865

Поделиться:

Massey Ferguson MF 865, год выпуска с 1982 по 1988 - Моторное масло, акпп, трансмиссионное масло, антифриз, тормозная жидкость, жидкость гур (гидроусилителя) и другие жидкости.

Топливо: Дизельное топливо
Клапанов на цилиндров: 2
Рабочий объем: 8800 куб. см.

Добавить в гараж

Двигатель Perkins AT6.354.4

Объем жидкости (основной): 14.4 л
Объем жидкости (фильтр): 1.2 л
Для двигателя

RAVENOL Formel Super SAE 15W-40 – минералдык мотор майы, жеңил бензин жана дизель кыймылдаткычтары үчүн, турбонаддуву менен жана ансыз, ошондой эле коммерциялык автотранспорт үчүн өндүрүлгөн.

Соответствие требованиям:
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B

подробнее скрыть подробности

SAE: 15W-40

API: CD, SF

ACEA: A2, B2

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
1 L

Артикул:
1113115-001

Объем:
4 L

Артикул:
1113115-004

Объем:
5 L

Артикул:
1113115-005

Объем:
10 L

Артикул:
1113115-010

Объем:
20 L

Артикул:
1113115-020

Объем:
20 L, ecobox

Артикул:
1113115-B20

Объем:
60 L

Артикул:
1113115-060

Объем:
60 L, басылган баррель

Артикул:
1113115-D60

Объем:
208 L

Артикул:
1113115-208

Объем:
208 L, басылган баррель

Артикул:
1113115-D28

Объем:
1 000 L

Артикул:
1113115-700

RAVENOL Formel Super SAE 15W-40 – минералдык мотор майы, жеңил бензин жана дизель кыймылдаткычтары үчүн, турбонаддуву менен жана ансыз, ошондой эле коммерциялык автотранспорт үчүн өндүрүлгөн.

Эскирүүнү жана картаюуну минималдаштырат. Илешкектүүлүк касиеттери жыл бою колдонууга мүмкүндүк берет. Алмаштыруу интервалдары автоөндүрүүчүнүн көрсөтмөлөрүнө жараша узартылышы мүмкүн.

Formel Super SAE 15W-40 колдонуу төмөнкүлөрдү камсыз кылат:

  • Коррозиядан жогорку коргоо
  • Сдвигке жакшы туруктуулук
  • Окислөөгө жогорку туруктуулук
  • Жакшы илешкектүүлүк-температуралык касиеттер
  • Гидравликалык толкочтордун туура иштеши (клапандын гидравликалык жөнгө салынышы)
  • Мыкты жуугуч жана диспергирлөөчү касиеттер
  • Жарым кургак майлоодо жогорку бекемдик запасы
  • Уплоттоочу материалдарга карата нейтралдуулук
  • Жакшы ишке киргизүү сапаттары
  • Цилиндрлерде, поршеньдерде, клапандарда, күйгүзүүчү шамдарда жана турбокомпрессорлордо жабышуу, кокстолуу жана шлам пайда болуусун алдын алуу
  • Катализаторлор менен максималдуу шайкештик
Параметр Ед. изм Значение Тестирование
Сунуштар CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Brand RAVENOL
RAVENOL
Илешкектүүлүк 15W-40
15W-40
Түрү Минералдык
Минералдык
API CD, SF
CD, SF
ACEA A2, B2
A2, B2
Талаптарга жооп берет CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Тығыздык 20°Cде g/cm³ 864 EN ISO 12185
864 g/cm³ EN ISO 12185
Түсү Сары-күрөң визуалдык
Сары-күрөң визуалдык
Илешкектүүлүк 100°Cде mm²/s 14.2 DIN 51562-1
14.2 mm²/s DIN 51562-1
Илешкектүүлүк 40°Cде mm²/s 105.4 DIN 51562-1
105.4 mm²/s DIN 51562-1
Илешкектүүлүк индекси VI 137 DIN ISO 2909
137 DIN ISO 2909
Муздоо температурасы °C -39 DIN ISO 3016
-39 °C DIN ISO 3016
Жануу температурасы °C 240 DIN EN ISO 2592
240 °C DIN EN ISO 2592
Щелочтук саны mgKOH/g 7.1 ASTM D2896
7.1 mgKOH/g ASTM D2896
Сульфаттуу күлдүүлүк %wt. 0.9 DIN 51575
0.9 %wt. DIN 51575
Толеранттуулуктар CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Тракторное масло

RAVENOL STOU SAE 10W-40 is an up-to-date multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.

Соответствие требованиям:
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 68 HVLP, ISO VG 100 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B

подробнее скрыть подробности

SAE: 10W-40

API: CG-4, GL-4, SF

ACEA: E3

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
5 լ

Артикул:
1310111-005

Объем:
10 լ

Артикул:
1310111-010

Объем:
20 լ

Артикул:
1310111-020

Объем:
20 լ, ecobox

Артикул:
1310111-B20

Объем:
60 լ

Артикул:
1310111-060

Объем:
1 000 լ

Артикул:
1310111-700

Объем:
208 լ

Артикул:
1310111-208

RAVENOL STOU SAE 10W-40 is an up-to-date multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.

RAVENOL STOU SAE 10W-40 meets the recommendations of all well known tractor manufacturers and is equal to use in engines, transmissions and hydraulic systems of modern tractors. Ensures trouble-free operation of all units in all seasons.

Application Note

RAVENOL STOU SAE 10W-40 has a wide range of applications in engines, transmissions and hydraulic systems of modern tractors.

RAVENOL STOU SAE 10W-40 is suitable as an engine oil for gasoline engines and intake and turbo charged diesel engines, also as gear oil (including wet brakes) and as hydraulic oil.

Characteristics

  • A powerful dispersion and detergency
  • A high activity against wear, corrosion and foam
  • A very strong resistance to oxidation
  • A high and stable viscosity index
  • An excellent extreme pressure properties
Параметр Ед. изм Значение Тестирование
Илешкектүүлүк 10W-40
10W-40
Brand RAVENOL
RAVENOL
API CG-4, GL-4, SF
CG-4, GL-4, SF
ACEA E3
E3
Талаптарга жооп берет Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
Туура келет Atlas Copco Kompressor
Atlas Copco Kompressor
Тығыздык 20°Cде g/cm³ 864 EN ISO 12185
864 g/cm³ EN ISO 12185
Rang tan տեսողական
tan տեսողական
Илешкектүүлүк 100°Cде mm²/s 14.7 DIN 51562-1
14.7 mm²/s DIN 51562-1
Илешкектүүлүк 40°Cде mm²/s 101.1 DIN 51562-1
101.1 mm²/s DIN 51562-1
Илешкектүүлүк индекси VI 151 DIN ISO 2909
151 DIN ISO 2909
Муздоо температурасы °C -33 DIN ISO 3016
-33 °C DIN ISO 3016
Жануу температурасы °C 234 DIN EN ISO 2592
234 °C DIN EN ISO 2592
Щелочтук саны mgKOH/g 12.4 ASTM D2896
12.4 mgKOH/g ASTM D2896
Сульфаттуу күлдүүлүк %wt. 1.45 DIN 51575
1.45 %wt. DIN 51575
Толеранттуулуктар Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
Для тракторов

RAVENOL STOU SAE 10W-30 is a multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.

Соответствие требованиям:
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B

подробнее скрыть подробности
  • Доступная фасовка
  • Полное описание
  • Параметры продукта

RAVENOL STOU SAE 10W-30 meets the recommendations of all well known tractor manufacturers and is equal to use in engines, transmissions and hydraulic systems of modern tractors. Ensures trouble-free operation of all units in all seasons. Suitable for wet brakes and shaft coupling (PTO clutches).

Application Note

RAVENOL STOU SAE 10W-30 has a wide range of applications in engines, transmissions and hydraulic systems of modern tractors.

RAVENOL STOU SAE 10W-30 is suitable as an engine oil for gasoline engines and intake and turbo charged diesel engines, also as gear oil (including wet brakes) and as hydraulic oil.

Characteristics

  • A powerful dispersion and detergency
  • Protection against wear, corrosion and foam
  • High resistance to oxidation
  • Excellent extreme pressure properties
  • A high and stable viscosity index
Параметр Ед. изм Значение Тестирование
SAE 10W-30
10W-30
API CG-4, GL-4, SF
CG-4, GL-4, SF
ACEA E3
E3
Recomendations Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
Suitable for Atlas Copco Kompressor
Atlas Copco Kompressor
Density at 20 °C g/cm³ 867 EN ISO 12185
867 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 11.7 DIN 51562-1
11.7 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 74.7 DIN 51562-1
74.7 mm²/s DIN 51562-1
Viscosity Index VI 151 DIN ISO 2909
151 DIN ISO 2909
Pourpoint °C -36 DIN ISO 3016
-36 °C DIN ISO 3016
Flashpoint °C 226 DIN EN ISO 2592
226 °C DIN EN ISO 2592
tbn mgKOH/g 12.4 ASTM D2896
12.4 mgKOH/g ASTM D2896
Sulphated Ash %wt. 1.58 DIN 51575
1.58 %wt. DIN 51575
Approvals Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
Allison C-4, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Ford ESN-M2C 159-B, ISO VG 68 HVLP, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, New Holland ESN-M2C 159-B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
Recommendations ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-30, New Holland / Ford ESN-M2C-15- 9B, Spezialtraktorenöl: John Deere J27, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
ACEA E3, API CG-4/SF, API GL-4, Allison C4, Atlas Copco Kompressor, Caterpillar TO-2, DTFR 15B110 (MB 228.3), Getriebeöl: SAE 80W, Hydrauliköl: HVLP ISO VG 68, Kompressorenöl: Holman Compair Kompressor, MAN 270, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, Motorenöl: SAE 10W-30, New Holland / Ford ESN-M2C-15- 9B, Spezialtraktorenöl: John Deere J27, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06D, ZF TE-ML 07B
Для тракторов

RAVENOL STOU SAE 15W-30 Ունիվերսալ հանքային տրակտորային յուղը, որը նախատեսված է գյուղատնտեսական տեխնիկայի, էքսկավատորների և շինարարական տեխնիկայի համար, մշակված է բարձրորակ, սոլվենտից մաքրված հանքային բազային յուղի հիման վրա: Այն հատուկ արտադրանք է, որը պահանջում է ընտրության մասնագիտական մոտեցում: Հետևեք արտադրողի առաջարկություններին հեղուկի ընտրության, դրա փոփոխության կարգի և հաճախականության վերաբերյալ:

Соответствие требованиям:
Allison C-4, Case IH International J I, Case IH MS 1118, Case IH MS 1206, Case IH MS 1209, Caterpillar TO-2, Fiat AF 87, Ford NH 024C, Ford NH 324B, Ford NH 540B, Ford Pumpentest, International Harvester B6, ISO VG 68 HLP, John Deere J20 C, John Deere J20 D, John Deere J27A, Kompressorenöl: Holman Compair Kompressor, Massey Ferguson CMS M1127, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, MIL-L-2105, Parker Denison HF-2, Vickers Pumpentest, ZF TE-ML 06B, ZF TE-ML 07B

подробнее скрыть подробности

SAE: 15W-30

API: CE, GL-4, SF

ACEA: E1, E2

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
20 լ, ecobox

Артикул:
1310112-B20

Объем:
60 լ

Артикул:
1310112-060

Объем:
60 լ, տպագիր տակառ

Артикул:
1310112-D60

Объем:
208 լ

Артикул:
1310112-208

Объем:
1 000 լ

Артикул:
1310112-700

Объем:
20 լ

Артикул:
1310112-020

RAVENOL STOU SAE 15W-30 Ունիվերսալ հանքային տրակտորային յուղը, որը նախատեսված է գյուղատնտեսական տեխնիկայի, էքսկավատորների և շինարարական տեխնիկայի համար, մշակված է բարձրորակ, սոլվենտից մաքրված հանքային բազային յուղի հիման վրա: Այն հատուկ արտադրանք է, որը պահանջում է ընտրության մասնագիտական մոտեցում: Հետևեք արտադրողի առաջարկություններին հեղուկի ընտրության, դրա փոփոխության կարգի և հաճախականության վերաբերյալ:

Օգտագործվում է ժամանակակից տրակտորային սարքավորումների շարժիչների, փոխանցումատուփերի և հիդրավլիկ համակարգերի համար: Բարձրորակ բազային յուղը և հատուկ ընտրված հավելանյութերի փաթեթը երաշխավորում են սարքավորումների ամբողջ տարվա անխափան աշխատանքը

Օգտագործումը STOU SAE 15W-30 ապահովում է.

  • Գերազանց լվացող և ցրող հատկություններ
  • Համապարփակ պաշտպանություն մաշվածությունից, կոռոզիայից և փրփուրից
  • Բարձր օքսիդացման դիմադրություն
  • Գերազանց ծայրահեղ ճնշման հատկություններ
  • Կայուն բարձր մածուցիկության Ինդեքս
Параметр Ед. изм Значение Тестирование
Илешкектүүлүк 15W-30
15W-30
Brand RAVENOL
RAVENOL
Түрү Mineral
Mineral
API CE, GL-4, SF
CE, GL-4, SF
ACEA E1, E2
E1, E2
Талаптарга жооп берет Allison C-4, Case IH International J I, Case IH MS 1118, Case IH MS 1206, Case IH MS 1209, Caterpillar TO-2, Fiat AF 87, Ford NH 024C, Ford NH 324B, Ford NH 540B, Ford Pumpentest, International Harvester B6, ISO VG 68 HLP, John Deere J20 C, John Deere J20 D, John Deere J27A, Kompressorenöl: Holman Compair Kompressor, Massey Ferguson CMS M1127, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, MIL-L-2105, Parker Denison HF-2, Vickers Pumpentest, ZF TE-ML 06B, ZF TE-ML 07B
Allison C-4, Case IH International J I, Case IH MS 1118, Case IH MS 1206, Case IH MS 1209, Caterpillar TO-2, Fiat AF 87, Ford NH 024C, Ford NH 324B, Ford NH 540B, Ford Pumpentest, International Harvester B6, ISO VG 68 HLP, John Deere J20 C, John Deere J20 D, John Deere J27A, Kompressorenöl: Holman Compair Kompressor, Massey Ferguson CMS M1127, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, MIL-L-2105, Parker Denison HF-2, Vickers Pumpentest, ZF TE-ML 06B, ZF TE-ML 07B
Туура келет Atlas Copco Kompressor
Atlas Copco Kompressor
Тығыздык 20°Cде g/cm³ 861 EN ISO 12185
861 g/cm³ EN ISO 12185
Rang tan տեսողական
tan տեսողական
Илешкектүүлүк 100°Cде mm²/s 11.8 DIN 51562-1
11.8 mm²/s DIN 51562-1
Илешкектүүлүк 40°Cде mm²/s 71.7 DIN 51562-1
71.7 mm²/s DIN 51562-1
Илешкектүүлүк индекси VI 159 DIN ISO 2909
159 DIN ISO 2909
Муздоо температурасы °C -39 DIN ISO 3016
-39 °C DIN ISO 3016
Жануу температурасы °C 222 DIN EN ISO 2592
222 °C DIN EN ISO 2592
Щелочтук саны mgKOH/g 11.7 ASTM D2896
11.7 mgKOH/g ASTM D2896
Сульфаттуу күлдүүлүк %wt. 1.5 DIN 51575
1.5 %wt. DIN 51575
Толеранттуулуктар Allison C-4, Case IH International J I, Case IH MS 1118, Case IH MS 1206, Case IH MS 1209, Caterpillar TO-2, Fiat AF 87, Ford NH 024C, Ford NH 324B, Ford NH 540B, Ford Pumpentest, International Harvester B6, ISO VG 68 HLP, John Deere J20 C, John Deere J20 D, John Deere J27A, Kompressorenöl: Holman Compair Kompressor, Massey Ferguson CMS M1127, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, MIL-L-2105, Parker Denison HF-2, Vickers Pumpentest, ZF TE-ML 06B, ZF TE-ML 07B
Allison C-4, Case IH International J I, Case IH MS 1118, Case IH MS 1206, Case IH MS 1209, Caterpillar TO-2, Fiat AF 87, Ford NH 024C, Ford NH 324B, Ford NH 540B, Ford Pumpentest, International Harvester B6, ISO VG 68 HLP, John Deere J20 C, John Deere J20 D, John Deere J27A, Kompressorenöl: Holman Compair Kompressor, Massey Ferguson CMS M1127, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, MIL-L-2105, Parker Denison HF-2, Vickers Pumpentest, ZF TE-ML 06B, ZF TE-ML 07B
Для дизелей

RAVENOL Spezial Diesel SAE 10W-30 is an excellent multi-grade engine oil for use in passenger vehicle and truck engines. It meets the requirements of modern diesel engines with and without induction. The favourable viscosity range ensures high lubricity year-round under different operating conditions.

Соответствие требованиям:
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B

подробнее скрыть подробности

SAE: 10W-30

API: CD

ACEA: B2

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Application Note

Use RAVENOL Spezial Diesel SAE 10W-30 according to the specifications of the diesel engine manufacturer.

Characteristics

  • Corrosion protection
  • Excellent shearing stability
  • High oxidation stability
  • Excellent viscosity-temperature attribute•Compelling detergent- and dispersant properties
  • Compelling detergent- and dispersant properties
  • High safety reserves even in boundary lubrication
  • Neutral to sealants
  • Excellent cold starting properties
  • Prevents adhesion, lacquering, carbonisation and sludge (black sludge) from forming on cylinders,pistons, valves, spark plugs and turbochargers
  • Suitable for use in vehicles with catalytic converters
Параметр Ед. изм Значение Тестирование
SAE 10W-30
10W-30
Type Mineral
Mineral
API CD
CD
ACEA B2
B2
Recomendations CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Density at 20 °C g/cm³ 859 EN ISO 12185
859 g/cm³ EN ISO 12185
Color Brown visual
Brown visual
Viscosity at 100 °C mm²/s 12.3 DIN 51562-1
12.3 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 84.3 DIN 51562-1
84.3 mm²/s DIN 51562-1
Viscosity Index VI 142 DIN ISO 2909
142 DIN ISO 2909
Pourpoint °C -33 DIN ISO 3016
-33 °C DIN ISO 3016
Flashpoint °C 244 DIN EN ISO 2592
244 °C DIN EN ISO 2592
tbn mgKOH/g 7.1 ASTM D2896
7.1 mgKOH/g ASTM D2896
Sulphated Ash %wt. 0.8 DIN 51575
0.8 %wt. DIN 51575
Approvals CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Recommendations CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Для дизелей

RAVENOL Spezial Diesel SAE 15W-40 is excellent multi-grade special engine oil which can be used in passenger cars as well as trucks. It fulfils the requirements of modern Diesel engines with or without supercharging. The favorable viscosity range ensures year-round high lubricity under different operating conditions.

Соответствие требованиям:
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B

подробнее скрыть подробности

SAE: 15W-40

API: CD

ACEA: B2

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Application Note

RAVENOL Spezial Diesel SAE 15W-40 can be used according to the manufacturer specification for Dieselengines.

Characteristics

  • A good shear stability
  • A high oxidation stability
  • An excellent viscosity temperature behaviour
  • Convincing detergent and dispersant attributes
  • High security reserves even under limited lubrication conditions
  • Very good cold start attributes
  • Avoids the formation of accumulations of mud (black sludge)
  • No problems with the use in catalyst vehicles
Параметр Ед. изм Значение Тестирование
SAE 15W-40
15W-40
Type Mineral
Mineral
API CD
CD
ACEA B2
B2
Recomendations CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Density at 20 °C g/cm³ 865 EN ISO 12185
865 g/cm³ EN ISO 12185
Color tan visual
tan visual
Viscosity at 100 °C mm²/s 14.1 DIN 51562-1
14.1 mm²/s DIN 51562-1
Viscosity at 40 °C mm²/s 106.1 DIN 51562-1
106.1 mm²/s DIN 51562-1
Viscosity Index VI 135 DIN ISO 2909
135 DIN ISO 2909
Pourpoint °C -36 DIN ISO 3016
-36 °C DIN ISO 3016
Flashpoint °C 240 DIN EN ISO 2592
240 °C DIN EN ISO 2592
tbn mgKOH/g 7.1 ASTM D2896
7.1 mgKOH/g ASTM D2896
Sulphated Ash %wt. 0.9 DIN 51575
0.9 %wt. DIN 51575
Approvals CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
Recommendations CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B
CCMC G4, MB 227.1, MIL-L-2104 D, MIL-L-46152 B

Коробка передач механическая 4/4

Объем жидкости (основной): 11.5 л
Getriebeol UTTO Arctic
Для тракторов

RAVENOL Fließverbesserer

подробнее скрыть подробности
  • Полное описание
  • Параметры продукта

can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of

RAVENOL Fließverbesserer

are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when

RAVENOL Fließverbesserer

is used (this is given when the goods are stored in an underground tank!).

RAVENOL Fließverbesserer

itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.

RAVENOL Fließverbesserer

will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of

RAVENOL Fließverbesserer

into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of

RAVENOL Fließverbesserer

has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added

RAVENOL Fließverbesserer

(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the

RAVENOL Fließverbesserer

reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!

Параметр Ед. изм Значение Тестирование

Колесные редукторы сзади

Объем жидкости (основной): 0.5 л
Getriebeol UTTO Arctic
Для тракторов

RAVENOL Fließverbesserer

подробнее скрыть подробности
  • Полное описание
  • Параметры продукта

can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of

RAVENOL Fließverbesserer

are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when

RAVENOL Fließverbesserer

is used (this is given when the goods are stored in an underground tank!).

RAVENOL Fließverbesserer

itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.

RAVENOL Fließverbesserer

will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of

RAVENOL Fließverbesserer

into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of

RAVENOL Fließverbesserer

has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added

RAVENOL Fließverbesserer

(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the

RAVENOL Fließverbesserer

reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!

Параметр Ед. изм Значение Тестирование

Колесные редукторы спереди

Объем жидкости (основной): 2.8 л
Getriebeol UTTO Arctic
Для тракторов

RAVENOL Fließverbesserer

подробнее скрыть подробности
  • Полное описание
  • Параметры продукта

can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of

RAVENOL Fließverbesserer

are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when

RAVENOL Fließverbesserer

is used (this is given when the goods are stored in an underground tank!).

RAVENOL Fließverbesserer

itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.

RAVENOL Fließverbesserer

will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of

RAVENOL Fließverbesserer

into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of

RAVENOL Fließverbesserer

has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added

RAVENOL Fließverbesserer

(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the

RAVENOL Fließverbesserer

reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!

Параметр Ед. изм Значение Тестирование

Редуктор привода от цилиндра

Объем жидкости (основной): 4.5 л
Getriebeol UTTO Arctic
Для тракторов

RAVENOL Fließverbesserer

подробнее скрыть подробности
  • Полное описание
  • Параметры продукта

can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of

RAVENOL Fließverbesserer

are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when

RAVENOL Fließverbesserer

is used (this is given when the goods are stored in an underground tank!).

RAVENOL Fließverbesserer

itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.

RAVENOL Fließverbesserer

will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of

RAVENOL Fließverbesserer

into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of

RAVENOL Fließverbesserer

has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added

RAVENOL Fließverbesserer

(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the

RAVENOL Fließverbesserer

reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!

Параметр Ед. изм Значение Тестирование

Гидравлическая тормозная система

Для тормозной системы

RAVENOL DOT 4 – Германияда өндүрүлгөн жогорку сапаттагы тормоз суюктугу. Бул продукт бор кислотасынын жогорку молекулалуу эфирлеринин аралашмасынан даярдалып, курамына жогорку эффективдүүлүккө ээ антиокисленткич кошулмалар, коррозияга каршы ингибиторлор жана прокладкалар менен эластомерлердин шишип кетишин алдын алуучу кошулмалар кирет.

подробнее скрыть подробности
  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
250 ml

Артикул:
1350601-250

Объем:
500 ml

Артикул:
1350601-500

Объем:
1 L

Артикул:
1350601-001

Объем:
20 L

Артикул:
1350601-020

DOT 4

RAVENOL DOT 4 – Германияда өндүрүлгөн жогорку сапаттагы тормоз суюктугу. Бул продукт бор кислотасынын жогорку молекулалуу эфирлеринин аралашмасынан даярдалып, курамына жогорку эффективдүүлүккө ээ антиокисленткич кошулмалар, коррозияга каршы ингибиторлор жана прокладкалар менен эластомерлердин шишип кетишин алдын алуучу кошулмалар кирет.

RAVENOL DOT 4 тормоз суюктугу FMVSS (Federal Motor Vehicle Safety Standard) №116 DOT 3 жана DOT 4 сапат деңгээлин талап кылган унаалардын тормоз системаларында колдонууга арналган. RAVENOL DOT 4 минералдык негиздеги тормоз суюктуктары менен, мисалы Citroen LHM+, аралаштырууга болбойт.

Төмөнкү спецификацияларга шайкеш келет: SAE J1704, ISO 4925, FMVSS 116 DOT4

DOT 4 колдонулушу төмөнкүлөрдү камсыздайт:

  • ABS менен жабдылган системалардын ишенимдүү иштешин
  • Химиялык туруктуулукту
  • Жакшы майлоону
  • Комплект бөлүктөрүнө карата нейтралдуу мүнөздү
  • Төмөн температурада агымдуулукту
  • Ушул эле спецификациядагы бардык тормоз суюктуктары менен шайкештикти
Параметр Ед. изм Значение Тестирование
FMVSS 116 (DOT) спецификациялары DOT-4
DOT-4
Түрү Синтетикалык
Синтетикалык
Brand RAVENOL
RAVENOL
Спецификацияларга туура келет DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704
Тығыздык 20°Cде g/cm³ 1052 EN ISO 12185
1052 g/cm³ EN ISO 12185
Түсү Ачык сары визуалдык
Ачык сары визуалдык
Илешкектүүлүк 100°Cде mPa*s 2.41 ASTM D445
2.41 mPa*s ASTM D445
Илешкектүүлүк -40°Cде cSt 1340 ASTM D445
1340 cSt ASTM D445
Кайноо температурасы °C 271 FMVSS 116
271 °C FMVSS 116
Муздуу суюктуктун кайноо температурасы °C 169 FMVSS 116
169 °C FMVSS 116
Жогорку температурадагы туруктуулук °C -1 FMVSS 116
-1 °C FMVSS 116
Химиялык туруктуулук °C 1 FMVSS 116
1 °C FMVSS 116
Учуп кетүү %w/w 61 FMVSS 116
61 %w/w FMVSS 116
-40°Cде агымдуулук i.O., 4s FMVSS 116
i.O., 4s FMVSS 116
-50°Cде агымдуулук i.O., 8s FMVSS 116
i.O., 8s FMVSS 116
Гигроскопиялык касиети -40°Cде тунуктун, 3s FMVSS 116
тунуктун, 3s FMVSS 116
Гигроскопиялык касиети +60°Cде Тунуктун FMVSS 116
Тунуктун FMVSS 116
-40°Cде аралашуусу Тунуктун FMVSS 116
Тунуктун FMVSS 116
+60°Cде аралашуусу Тунуктун FMVSS 116
Тунуктун FMVSS 116
Суунун курамы % — 0.2 DIN 51777-1
— 0.2 % DIN 51777-1
Цинктелген темирге тийгизген таасири Δ mg/cm² 0.04 FMVSS 116
0.04 Δ mg/cm² FMVSS 116
Болотко коррозияга туруктуулук mg/cm² -0.01 FMVSS 116
-0.01 mg/cm² FMVSS 116
Алюминийге кычкылданууга туруктуулук mg/cm² 0.02 FMVSS 116
0.02 mg/cm² FMVSS 116
Чоюнга коррозияга туруктуулук Δ mg/cm² -0,03 FMVSS 116
-0,03 Δ mg/cm² FMVSS 116
Латунга коррозияга туруктуулук mg/cm² -0.08 FMVSS 116
-0.08 mg/cm² FMVSS 116
Медине коррозияга туруктуулук mg/cm² -0.05 FMVSS 116
-0.05 mg/cm² FMVSS 116
Цинкке коррозияга туруктуулук mg/cm² 0.01 FMVSS 116
0.01 mg/cm² FMVSS 116
Тууралуу чөкмө бөлүнүү % — 0.05 FMVSS 116
— 0.05 % FMVSS 116
рН көрсөткүчү 8.2 FMVSS 116
8.2 FMVSS 116
Резинанын диаметринин өзгөрүшү 0.16 FMVSS 116
0.16 FMVSS 116
Катуулуктун өзгөрүшү °IRHD -4 FMVSS 116
-4 °IRHD FMVSS 116
Сырткы көрүнүшү i.O. FMVSS 116
i.O. FMVSS 116
SBR резинасына туруктуулук 70°Cде Өзгөрүү 0.56 FMVSS 116
0.56 Өзгөрүү FMVSS 116
SBR резинасына туруктуулук 120°Cде Өзгөрүү 0.73 FMVSS 116
0.73 Өзгөрүү FMVSS 116
EPDM резинасына туруктуулук 70°Cде (SAE J1703 талабы) Катуулук -2 FMVSS 116
-2 Катуулук FMVSS 116
EPDM резинасына туруктуулук 120°Cде Катуулук -2 FMVSS 116
-2 Катуулук FMVSS 116
Жаратылыш резинасына ISO 4925 боюнча 70°Cде туруктуулук Өзгөрүү 0.38 FMVSS 116
0.38 Өзгөрүү FMVSS 116
Толеранттуулуктар DOT 4, ISO 4925 Class 4, SAE J 1704
DOT 4, ISO 4925 Class 4, SAE J 1704

Гидравлическая система

Объем жидкости (основной): 41.6 л
Getriebeol UTTO Arctic
Для тракторов

RAVENOL Fließverbesserer

подробнее скрыть подробности
  • Полное описание
  • Параметры продукта

can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of

RAVENOL Fließverbesserer

are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when

RAVENOL Fließverbesserer

is used (this is given when the goods are stored in an underground tank!).

RAVENOL Fließverbesserer

itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.

RAVENOL Fließverbesserer

will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of

RAVENOL Fließverbesserer

into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of

RAVENOL Fließverbesserer

has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added

RAVENOL Fließverbesserer

(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the

RAVENOL Fließverbesserer

reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!

Параметр Ед. изм Значение Тестирование

Точки смазки масленки, колесные подшипники, спереди

Автомобильная смазка

RAVENOL Hot Red Grease HRG 1

подробнее скрыть подробности

Аналоги OEM:
Caterpillar 4525996

 

Режим эксплуатации: нормальный

Проверка, км: 2000

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
1 կգ

Артикул:
1340120-001

Объем:
5 կգ

Артикул:
1340120-005

Объем:
10 կգ

Артикул:
1340120-010

Объем:
15 կգ

Артикул:
1340120-015

Объем:
25 կգ

Артикул:
1340120-025

Объем:
180 կգ

Артикул:
1340120-180

RAVENOL Hot Red Grease HRG 1

is a red lithium complex soap lubricating grease based on high quality base oils. Excellent work resistance, rust and corrosion protection. Application for the lubrication of roller and friction bearings under extreme pressure at high bearing temperatures. Particularly recommended for the lubrication of wheel bearings on commercial vehicles and for high-speed passenger car wheel bearings.

Application Note

RAVENOL Hot Red Grease HRG

is used as an universal grease in the industrial sector and in the motor vehicle sector.

RAVENOL Hot Red Grease HRG

is particularly recommended as a grease for friction and roller bearings on motor vehicles, equipment, machinery, conveyors, construction vehicles, etc.

Параметр Ед. изм Значение Тестирование
Brand RAVENOL
RAVENOL
Спецификацияларга туура келет DIN 51502 KP1P-35, ISO 6743-9: ISO-L-XCEEB1
DIN 51502 KP1P-35, ISO 6743-9: ISO-L-XCEEB1
Rang reddish brown տեսողական
reddish brown տեսողական
Коюлткуч lithium soap DIN 51757
lithium soap DIN 51757
NLGI-Class 1 DIN 51818
1 DIN 51818
Продукттардын классификациясы KP1P-35 DIN 51502
KP1P-35 DIN 51502
Иштөө температурасы °C -35 / +160 DIN 51825
-35 / +160 °C DIN 51825
Иштөө температурасы (кыска мөөнөттүү) °C 200 DIN 51757
200 °C DIN 51757
Пенетрация 60 цикл 310-340 ISO 2137
310-340 60 цикл ISO 2137
Тамчынын түшүү температурасы °C 260 — DIN ISO 2176
260 — °C DIN ISO 2176
Медине коррозия тести 120°C / 24 саат 1 DIN 51811
1 120°C / 24 саат DIN 51811
Суу өткөрбөстүк (3 саат / 90°C) °C 1-90 DIN 51807-1
1-90 °C DIN 51807-1
VKA ширетүү жүктөмү N 2200 — 2400 DIN 51350-4
2200 — 2400 N DIN 51350-4
Илешкектүүлүк кинематикалык 140 DIN 51562-1
140 кинематикалык DIN 51562-1
Толеранттуулуктар DIN 51502 KP1P-35, ISO 6743-9: ISO-L-XCEEB1
DIN 51502 KP1P-35, ISO 6743-9: ISO-L-XCEEB1

Система охлаждения

Объем жидкости (основной): 47.8 л
Охлаждающая жидкость

RAVENOL TTC Traditional Technology Coolant Premix -40°C — моноэтиленгликоль негизинде даярдалган антифриз, курамында нитриттер, аминдер жана фосфаттар жок. Кыймылдаткычта колдонулган бардык металлдарды, анын ичинде алюминийди жана ар түрдүү эритмелерди коррозиядан узак мөөнөт (5 жылга чейин) коргойт.

Соответствие требованиям:
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C

подробнее скрыть подробности
  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
1,5 L

Артикул:
1410105-150

Объем:
5 L

Артикул:
1410105-005

Объем:
10 L

Артикул:
1410105-010

Объем:
20 L

Артикул:
1410105-020

Объем:
20 L, ecobox

Артикул:
1410105-B20

Объем:
60 L

Артикул:
1410105-060

Объем:
208 L

Артикул:
1410105-208

Объем:
1 000 L

Артикул:
1410105-700

RAVENOL TTC Traditional Technology Coolant Premix -40°C — моноэтиленгликоль негизинде даярдалган антифриз, курамында нитриттер, аминдер жана фосфаттар жок. Кыймылдаткычта колдонулган бардык металлдарды, анын ичинде алюминийди жана ар түрдүү эритмелерди коррозиядан узак мөөнөт (5 жылга чейин) коргойт.

RAVENOL TTC Traditional Technology Coolant Premix -40°C сары-жашыл флуоресценттүү түскө ээ, бул мүмкүн болгон агып чыгуу жерлерин дефектоскоп (көк лампа) менен тез аныктоого мүмкүндүк берет.

RAVENOL TTC - Protect C11 Premix -40ºC колдонулушу төмөнкү артыкчылыктарды камсыздайт:

  • Жеңил металлдан жасалган кыймылдаткычтар үчүн эң ылайыктуу
  • Жакшы щелочтук запасы
  • Коррозиядан оптималдуу коргоо үчүн жогорку сапаттагы кошумчалар
  • Унаа радиаторлорунда колдонулган эластомерлер менен шайкештик
Параметр Ед. изм Значение Тестирование
Сунуштар AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
Brand RAVENOL
RAVENOL
ASTM D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF
D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF
Талаптарга жооп берет AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
Туура келет Suzuki
Suzuki
Тығыздык 20°Cде g/cm³ 1080 EN ISO 12185
1080 g/cm³ EN ISO 12185
Түсү Сары-жашыл визуалдык
Сары-жашыл визуалдык
pH 20°Cде 7,8 ASTM D1287
7,8 ASTM D1287
Муздоо температурасы °C -40 ASTM D1177
-40 °C ASTM D1177
Толеранттуулуктар AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
Охлаждающая жидкость

RAVENOL TTC - Protect C11 Concentrate — этиленгликоль негизиндеги антифриз концентраты, курамында нитриттер, аминдер жана фосфаттар жок. Бул суюктук кыймылдаткычта колдонулган бардык металлдарды, анын ичинде алюминийди жана ар кандай эритмелерди узак мөөнөттүү (5 жылга чейин) коррозиядан коргойт.

Соответствие требованиям:
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C

подробнее скрыть подробности
Внимание! Это концентрированный продукт. Перед использованием необходимо разбавить дистиллированной водой в пропорции 1:1.
  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
1,5 L

Артикул:
1410100-150

Объем:
5 L

Артикул:
1410100-005

Объем:
10 L

Артикул:
1410100-010

Объем:
20 L

Артикул:
1410100-020

Объем:
20 L, ecobox

Артикул:
1410100-B20

Объем:
60 L

Артикул:
1410100-060

Объем:
60 L, пластик

Артикул:
-

Объем:
60 L, басылган баррель

Артикул:
1410100-D60

Объем:
208 L

Артикул:
1410100-208

Объем:
1 000 L

Артикул:
1410100-700

RAVENOL TTC - Protect C11 Concentrate — этиленгликоль негизиндеги антифриз концентраты, курамында нитриттер, аминдер жана фосфаттар жок. Бул суюктук кыймылдаткычта колдонулган бардык металлдарды, анын ичинде алюминийди жана ар кандай эритмелерди узак мөөнөттүү (5 жылга чейин) коррозиядан коргойт.

RAVENOL TTC - Protect C11 Concentrate сары-жашыл флуоресценттүү түскө боёлгон, бул антифриз агып жаткан жерлерди дефектоскоп (көк лампа) аркылуу тез аныктоого шарт түзөт.

RAVENOL TTC - Protect C11 Concentrate антифриз концентратын суюлтпай колдонууга болбойт, анткени таза этиленгликолдун тоңуу температурасы болгону -15°С түзөт. Бирок курамына 20% суу кошулганда тоңуу температурасы кескин түрдө -65°С чейин төмөндөйт.

Мыкты натыйжага жетүү үчүн антифриз концентратын деионизацияланган суу менен суюлтуу сунушталат, мисалы, RAVENOL Destilliertes Wasser entionisiert. Эгер деионизацияланган суу жок болсо, кадимки тазаланган суу менен да суюлтууга болот.

Суюлтуу катышы жана тоңуу чекити:

Коргоо температурасы °C % антифриз % суу
-20°C 35% 65%
-37°C 50% 50%
-50°C 60% 40%

RAVENOL TTC Protect C11 Concentrate колдонулушу төмөнкү артыкчылыктарды камсыздайт:

  • Жеңил металлдан жасалган кыймылдаткычтар үчүн эң ылайыктуу
  • Жакшы щелочтук запасы
  • Коррозиядан оптималдуу коргоо үчүн жогорку сапаттагы антикоррозиялык кошумчалар
  • Унаа радиаторлорунда колдонулган эластомерлер менен шайкештик
Параметр Ед. изм Значение Тестирование
Сунуштар AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
Brand RAVENOL
RAVENOL
ASTM D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF
D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF
Талаптарга жооп берет AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
Туура келет Suzuki
Suzuki
Тығыздык 20°Cде g/cm³ 1130 EN ISO 12185
1130 g/cm³ EN ISO 12185
Түсү Сары-жашыл визуалдык
Сары-жашыл визуалдык
Щелочтук саны mgKOH/g — 20 ASTM D1121
— 20 mgKOH/g ASTM D1121
Кайноо температурасы °C 155 ASTM D1120
155 °C ASTM D1120
Суунун курамы % — 5 ASTM D1123
— 5 % ASTM D1123
Жануу температурасы °C 112 DIN 51758
112 °C DIN 51758
Муздоо температурасы (50% эритме) °C -37 ASTM D1177
-37 °C ASTM D1177
рН көрсөткүчү (50% антифриз/50% суу) 8,4 ASTM D1287
8,4 ASTM D1287
Толеранттуулуктар AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
Для аккумуляторов

RAVENOL Destilliertes Wasser (entionisiert) – атайын даярдалган дистилденген, деиниондоштурулган суу. Курамында иондор жок. VDE талаптарына жооп берет. Орусиялык жана чет элдик аккумуляторлордун бардык түрлөрү үчүн эң ылайыктуу.Тиричилик максаттарда да колдонулат: буу үтүктөрү, аквариумдар ж.б. үчүн. Кадимки дистилденген сууга салыштырмалуу ион алмаштыруучу чайырлар менен өтө терең тазалоодон өткөрүлөт.

Соответствие требованиям:
DIN 43530-4, DIN EN 50272

подробнее скрыть подробности

Аналоги OEM:
BMW 83190394350, BMW 83190394350

  • Доступная фасовка
  • Полное описание
  • Параметры продукта

Объем:
1 L

Артикул:
1360010-001

Объем:
5 L

Артикул:
1360010-005

Объем:
5 L, адис. канистр

Артикул:
1360010-005

Код:
4014835300514

Объем:
20 L

Артикул:
1360010-020

Объем:
208 L

Артикул:
1360010-208

Объем:
1 000 L

Артикул:
1360010-700

RAVENOL Destilliertes Wasser (entionisiert) – атайын даярдалган дистилденген, деиниондоштурулган суу. Курамында иондор жок. VDE талаптарына жооп берет. Орусиялык жана чет элдик аккумуляторлордун бардык түрлөрү үчүн эң ылайыктуу.

Тиричилик максаттарда да колдонулат: буу үтүктөрү, аквариумдар ж.б. үчүн. Кадимки дистилденген сууга салыштырмалуу ион алмаштыруучу чайырлар менен өтө терең тазалоодон өткөрүлөт.

Төмөнкү талаптарга жооп берет:

DIN 57 510 VDE – аккумуляторлор жана батареялар үчүн
DIN 43 530 бөлүк 4 – аккумулятордук электролиттер, коргошун аккумуляторлору жана щелочтуу аккумуляторлор үчүн

Колдонуу тартиби: RAVENOL Destilliertes Wasser (entionisiert) антифриз концентратын суюлтуу үчүн, ошондой эле радиаторлордо, буу үтүктөрүндө жана аквариумдарда (суу катуулугун төмөндөтөт) колдонулат.

Параметр Ед. изм Значение Тестирование
Сунуштар DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
Brand RAVENOL
RAVENOL
Талаптарга жооп берет DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272
Толеранттуулуктар DIN 43530-4, DIN EN 50272
DIN 43530-4, DIN EN 50272